| Frequency Response | 50-15,000Hz |
| Sensitivity | 2.5mV/Pa |
| Impedance | 600Ω |
AUD-98XLR®, General PA Series, Microphones, Music System
AUD-98XLR®
Unidirectional Dynamic
PA Applications
- High output Neodymium cartridge. Excellent intelligibility & wide frequency response. Attractive appearance.
- Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. twin core shielded low noise cable.
₹1,499.00
CompareBased on 0 reviews
Be the first to review “AUD-98XLR®”
Related products
-
High Wattage PA Mixer Amplifiers, Mixer Amplifiers, Music System, SSA-5000EM
SSA-5000EM
500 WATTS
High Wattage PA Mixer Amplifier
- 7 Mic & 2 Aux Inputs.
- Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
- Line Input for connecting the output from any external mixer or permitting SSA-5000EM to be used as a Booster Power Amplifier.
- Resettable circuit breaker for protection against overload and short circuit.
- Instant transfer to DC power (Car Battery) if AC power fails.
- Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
SKU: SEB-MA-HWMA-03 -
Mixer, Music System, PROMIX-1442R
PROMIX-1442R
With Built-in MP3 Recorder, 24 Digital Effects, 2 Group Outputs, 48V Phantom Supply on all Channels
AC Operation
- Professional mixer with user-friendly construction & aesthetically designed side panels.
- 12 MIC and 10 LINE Balanced Mono inputs with enhanced headroom. 2 STEREO Balanced inputs.
- Built-in MP3 recorder with USB playback and Bluetooth facility.
- Digital multi EFFECTS processor with 24 built-in effects.
- LCD display for viewing the effects/USB settings.
- All MIC inputs are through 3 pin F/XLR connectors.
- All LINE & STEREO inputs are through 6.3mm (1/4”) stereo phone jack sockets.
- All MIC inputs are available with 48V phantom supply which can be switched ON/OFF.
- Each input channel has a GAIN control, 4 band active EQ controls, AUX1, AUX2, AUX3/EFX, AUX4/FX and PAN control.
- The STEREO channel has a GAIN control, 3 band active EQ control, AUX1, AUX2, AUX3/EFX, AUX4/FX and PAN control.
- Pre/Post selector switch for AUX1 and AUX2 in each channel.
- Channel MUTE switch provided on each individual channel.
- Peak LED for signal clipping indication. Signal LED for input signal indication.
- Balanced Left & Right MAIN Mix outputs through M/XLR connectors as well as 6.3mm (1/4”) stereo phone jack sockets.
- Stereo Tape Playback Input through L&R RCA sockets.
- Stereo Tape Output through L&R RCA sockets.
- Two group outputs through 6.3mm (1/4”) phone jack sockets and individual group faders.
- Monitor outputs through 6.3mm (1/4”) phone jack sockets and individual control.
- Easy and accurate monitoring of Left & Right output levels through individual 12 segment LED array.
- L&R AUX RETURN inputs with level control. PFL switch on each channel.
- Headphone output with Level Control for output monitoring.
- Operates on 240V 50Hz AC mains.
SKU: SEB-M-PAMCS-01 -
AFT-24F2M, Mixer, Music System, PA Effect Processors
AFT-24F2M
- AFT-24F2M is a dual channel automatic feedback suppression unit. This feature packed signal processor is designed to provide fast and accurate feedback control in fixed installations as well as live shows.
- 24 digital notch filters and LED indicators for each channel.
- Electronically balanced inputs and outputs available through XLR connectors and 6.3mm (1/4”) stereo phone sockets.
- Each channel has a control for selecting the filter width between 1/80th and 1/5th octave.
- Dual input sensitivity of -10dBV and +4dBu is provided for each channel, which is individually selectable through push switches.
- Each channel has separate push switch for choosing between three modes of operation – Bypass/ Setup/Live.
- Provision of a Lock switch on rear panel enables the user to keep its settings intact during a program.
SKU: SEB-PEP-09 -
ACX-202, DMX-44, Mixer, Music System, PA Effect Processors
ACX-202
Active Crossover
.
- A highly reliable, high performance 2 channel active crossover for use with the best cabinet speakers and subwoofers. Apart from top speakers in stereo mode, ACX-202 allows subwoofers to be connected in either stereo or mono mode.
- Full Stereo mode with Dual High & Low frequency outputs. Six selectable crossover frequencies. Extra sharp 24db / octave filter for very clear separation of frequency bands.
- Separate output for connecting subwoofer in mono mode, with 2 selectable crossover frequencies & 24db / octave filter.
- Separate input level controls for each channel, with LED indicator for clipping level.
- Phase Reversal Facility for Lo Outputs.
- XLR as well as TRS connectors for balanced inputs & outputs.
SKU: SEB-PEP-08
There are no reviews yet.